The stadium seating ZK06 is perfect for
stadiums for seat design, shape and installation. It is very beautiful, safe
and long life to be used in stadium, good for installation and repairing them. The seat material is made of HDPE which is High-density
polyethylene. One time to be shaped and soft surfaces. HDPE is good material
for seats and high resistance against high temperatures, Anti-aging, UV proof, impact resistance, high
and low temperature resistance, good anti-oil resistance.
The size of the ZK06 HDPE Plastic seat: Wide×Deep×Hight=400×380×80(mm).
We design an hole in the seat to release water in case it has no water kept in
Main mechanical properties of HDPE:
ZK06 seats is approved with standard QB/T2601-2013, Seats
and backrest of the chair static load: 2000N×20times,
Back of the chair static load 800N×20times. Balance load of seat part: 2000N. Endurance
load of seats part and back part: 960N×200 thousand times, and 350N×200 thousand
times. Anti-impact Ability: Hight 360mm×20 times, back of the chair Hight 630mm×20
times. Ageing resistance performance: ≥3500. Outdoor UV proof. High temperature
resistance：-60°C to ＋80°C, 72h. The seat Life
span: more than 10 years.
Color of the HDPE: We have standard color for produce,
also we are glad to supply chairs with required Pantone Numbers, required Color
samples for confirm.
There are 3 types
Floor mount (directly installed upon the front end of concrete
step or wooden step, with screws in the bottom to fix the seat and the step).
1，Floor install with Steel pipe
2, Floor mounted with iron dish.
Stand feet and wall feet Riser mount (seats are
installed upon the aluminum feet, which fixed upon the riser slope of concrete steps
or wooden steps)